Lionpak^® 2504

• A dense packing with a high degree of resilience, incorporating a break-in lubricant
• Both yarns are highly lubricated during manufacture; the red fluoropolymer-based yarn releases lubricant on inside diameter when packing is bent around the shaft
• This lubrication system provides very smooth start-up for pumps, plus long service life with low friction properties to safeguard shafts and sleeves from wear
• Graphite content aids heat dissipation to further extend the service life

• Dynamic and static duties, including pumps, valves, mixers and reactors, across many industrial sectors. It is recommended for cooling water pumps and condensate extraction systems.
• Also suitable for use with demineralised water, raw water, hydrocarbons, paints, synthetic resins, emulsions, viscous slurries, and many other general industrial media

Valve Stem Duties

• Maximum operating temperature: +250°C (+482°F)
• Minimum operating temperature: -100°C (-148°F);
• Maximum system pressure: 25 MPa/250 bar (3626 psi)

Centrifugal Pumps and Rotary Equipment

• Maximum operating temperature: +250°C (+482°F)
• Minimum operating temperature: -100°C (-148°F)
• Maximum system pressure (standard): 2 MPa/20 bar (290 psi)
• Maximum shaft speed: 20 m/s (3937 fpm)

Reciprocating Pumps and Rams

• Maximum operating temperature: +250°C (+482°F)
• Minimum operating temperature: -50°C (-58°F)
• Maximum system pressure: 10 MPa/100 bar (1450 psi)
• Maximum rod speed: 2 m/s (394 fpm)

Compatible with media in the range of pH 3-14.

• All popular square sections from 3 mm (¹/₈") to 50 mm (2") in boxes containing 8 m (26' 3") in coil form or on spools as detailed in the product datasheet
• Also supplied as split preformed rings and sets
• Please refer to the product datasheet for spool ordering information