You are currently viewing the James Walker Global website.

Close
Supagraf fe banner

Supagraf® FE

A high performance fugitive emission control packing for valves.

TYPICAL APPLICATIONS
  • CO2
  • Fugitive emissions
  • Valves

Supagraf FE is third party tested to all known industry standards producing exceptional performance, 8 ppmV average emission level in API 622 3rd edition test with no adjustments. This is a cost effective fully braided packing manufactured in exfoliated high purity 98% graphite, reinforced with Inconel wire to provide additional strength and resistance to pressure and extrusion.

This packing incorporates a new generation cutting-edge lubrication system that not only helps to prevent the pick-up of graphite on valve stems but also provides ultra-low friction performance with advanced corrosion inhibiting properties.

  • Third party verified emission control performance
  • Suitable for both rotary as well as rising-stem valve application
  • Ultra-low friction performance without graphite pick-up reducing the torque needed for efficient valve action
  • Fire safe capability confirmed by third-party certification according to API 607 Edition 7 Fire Safety / ISO 10497:2010
  • Suitable for use in valves from pressure Class 150 up to Class 1500 - please consult us for further advice and Class 2500 suitability
  • Can mitigate the effects of stem judder and friction by helping to prevent graphite pickup or high spot friction on the valve stem, especially in applications with high rates of thermal cycling and dynamic stem movements

  • Supagraf FE is designed for harsh operating conditions where fugitive emissions from valves need to be reduced to well below 50 ppm
  • Suitable for all types of valves performing arduous duties handling fluid media such as hydrocarbon liquid fuels, gases including CO2, lubricating oils, and processing chemicals
  • Also suitable for valves that handle dry gases and other fluids

Valve stem duties:

  • Maximum operating temperature in oxidising conditions: +450°C (+842°F)
  • Minimum operating temperature: -200°C (-328°F)
  • Maximum system pressure (standard): 25 MPa/250 bar (3626 psi) - contact us for advice on use at higher pressures

Compatible with media in the range of pH 1-14 excluding strong oxidising agents. The product has negligible volatile content.

  • All popular square sections from 3 mm (1/8") upwards in boxes containing 8 m (26' 3") in coil form or on spools as detailed in the product datasheet
  • Also supplied as split preformed rings and sets
  • Non-standard square or rectangular sections made to order
  • Please refer to the product datasheet for spool ordering information

  • ISO 15848-1:2015 Class BH (CO1)
  • API 622 3rd Edition
  • TA Luft VDI 2440 Rev. 07.2002
  • Shell MESC SPE 85/204
  • Shell specification SPE 77/312 Class AH Rev. 02.2019
  • API 607 Edition 7 Fire Safety
Related Downloads

Supagraf valve packing fitting guide

English pdf (779 KB) Download

Supagraf FE datasheet

English pdf (375 KB) Download
Download

Compression packing guide

Our constant advances in materials and lubricants, product design and manufacturing techniques, keep us at the forefront of compression packing technology. We therefore bring you one of the widest ranges of packings to match the temperatures, pressures and speeds of your most modern fluid handling systems, and economical packings for your older plant.

Find out more
Compression packing guide

Expert to Expert

Want to discuss your project, engineering or materials challenge expert to expert? Simply provide us with your contact details and a little information about the application you are working on, and one of our experts will contact you as soon as possible.

Contact us